b.pad – Blinking LEDs, Cannot Load Firmware. Shop › Forums › QnA › b.pad – Blinking LEDs, Cannot Load Firmware. This topic contains 2 replies, has 2 voices, and was last updated by firstname.lastname@example.org 3 months, 3 weeks ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts January 2, 2017 at 1:50 pm #5041 EricParticipant I am following the information on http://blog.winkeyless.kr/183 however, I am unable to get the firmware loaded (the LEDs are blinking all the time) I went through the troubleshooting steps and followed the soldering guide. How to fix when keyboard doesn’t work after uploading firmware Soldering Guide When I click the Firm Up button it runs, briefly stops blinking and then continues to blink. I checked the PCB, and I get the HIDBoot item in my devices, and the LEDs are all blinking. I have the 4×6 layout on the b.pad. What am I to do next? January 2, 2017 at 1:53 pm #5042 EricParticipant The images are too large so I placed them on imgur. p.bad Thanks! January 2, 2017 at 2:29 pm #5044 email@example.comKeymaster Hi, Happy New Year!! Sorry for your inconvenience. If the leds are blinking, most of the reasons are coming from bad soldering – electric short, wrong direction(polarity)… Please check solderings. And could you tell me whether keyboard is working? Thanks. Hojin.Yi Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.