April 26, 2017 at 9:38 pm #5826
The ‘6’ key on my b.pad does not work.
I have tried with several different switches, and also soldering on a different diode.
But the keypress is not registered on the computer.
I have flashed the firmvare, and in BootMapperClient using “Toggle bootmapper” nothing registres when i press the ‘6’ key.
All other keys work.April 27, 2017 at 7:49 pm #5837
Sorry for your inconvenience.
I’m 90% sure that the problem is due to bad soldering of the switch or diode.
Could you show me your PCB?
And let me know your order number?
Hojin.YiApril 28, 2017 at 1:22 am #5839This reply has been marked as private.April 28, 2017 at 1:24 am #5840This reply has been marked as private.April 28, 2017 at 10:33 am #5844
Could you check..
1. Make a short between point 1 and 2. It the key is entered, the switch would have a problem.
2. Make a short between point 1 and 3. If the key is entered, the diode would have a problem.
Please let me know the result.April 30, 2017 at 12:33 am #5849
I made a short between 1 and 2 – Key was not entered
When I made a short between 1 and 3 – Key was enteredApril 30, 2017 at 1:54 pm #5852
If then you have to check the diodes.
– Diode is not broken
– Diode is well soldered
– Soldering pads is OK.
Hojin.YiApril 30, 2017 at 8:48 pm #5856
Could you wire circle 2 and green circles?May 1, 2017 at 1:11 am #5858
Diode is not broken and well soldered.
Soldering pads should be ok, if not they have been faulty from the start.
Nothing happened when i wired circle 2 and green circleMay 1, 2017 at 12:18 pm #5860
Could you show me your wiring?May 1, 2017 at 9:13 pm #5862
I got the key working now.
Thanks for all your help
You must be logged in to reply to this topic.