Changing the top plate Shop › Forums › QnA › Changing the top plate This topic contains 1 reply, has 2 voices, and was last updated by firstname.lastname@example.org 2 months, 1 week ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts March 18, 2017 at 7:46 am #5508 lucifielParticipant Hi, If I want to change the top plate of my assembled b.face will I need to desolder all my switches and LEDs? Thanks, Kenny March 18, 2017 at 9:14 am #5509 email@example.comKeymaster Hi Kenny. If the switches and in-switch LEDs were soldered already, you should desolder them. If they were installed by hot-swap sockets, you don’t have to do that. (https://www.reddit.com/r/MechanicalKeyboards/comments/5aghci/buying_group_buy_for_hot_swap_connectors/) Thanks. Hojin.Yi Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.