I broke the pcb rgb pad Shop › Forums › QnA › I broke the pcb rgb pad This topic contains 5 replies, has 2 voices, and was last updated by Jerry 2 months, 3 weeks ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts May 26, 2017 at 1:14 am #5998 JerryParticipant Hello, I broke the rgb pad w6 as the setup is a serial, How can I jump to make w5 to w7 ? thank you 😀 May 26, 2017 at 9:50 pm #6005 firstname.lastname@example.orgKeymaster Hi Sorry for your inconvenience. Could you tell me your order number? Thanks. Hojin.Yi May 27, 2017 at 12:16 am #6007 email@example.comKeymaster Try to wire them like the pic I attached. Attachments:You must be logged in to view attached files. May 27, 2017 at 3:49 am #6011 JerryParticipant Hello, I tried to short it doesn’t work because the solder pad is gone As you can see in the picture Thank May 27, 2017 at 7:38 pm #6018 firstname.lastname@example.orgKeymaster Then wire it like this attached pic. Thanks. Attachments:You must be logged in to view attached files. May 27, 2017 at 10:29 pm #6021 JerryParticipant Thank you 😀 Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.