Question about indicator LEDs

Shop Forums QnA Question about indicator LEDs

This topic contains 2 replies, has 2 voices, and was last updated by  flashteker@gmail.com 8 years, 5 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #1447

    redsevn
    Participant

    Hi Winkeyless, I had a few questions about soldering indicator LEDs.

    1) does the b.pad (original version, not X2) have an indicator for scroll-lock? I see pads for numlock and capslock but nothing for scroll-lock.

    2) On my B.87X2, I see three places for indicator LED at the bottom of the board. Are these a separate from the under-switch LED lighting (e.g. on capslock, scroll-lock, and pause (for numlock indicator))? Should I wire them with the same resistors as the ones I’m using on the rest of my switches?

    Thanks!

    #1449

    redsevn
    Participant

    Also while I am asking questions, what is the difference between keymap_gb_face_thumb and keymap_gb_EN_face_thumb firmware files?

    And inside the firmware, what are FN hangle and FN hanja? Thanks!

    #1466

    Hi

    1) B.pad doesn’t have ScrollLock LED.

    2) If you want to add the LED to the switch, you have to solder LED and resistors around the switch.

    If you want to add it below the spacebar,
    there is a place where you can add LED and resistors below spacebar.

    Caution : Just use one of them. Not both.

    3) keymap_gb_face_thumb : For the user whose language is not English.
    keymap_gb_EN_face_thum : For the user whose language is English.

    The FN hangle and FN hanja keymap are used for dual action key map.
    (For more details, visit http://winkeyless.kr/infomation-on-ps2avru-and-ps2avrgb/)

    Thanks.
    Hojin.Yi

Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘QnA’ is closed to new topics and replies.