Weird key press behaviour Shop › Forums › QnA › Weird key press behaviour This topic contains 7 replies, has 3 voices, and was last updated by Garth Clardy 4 weeks ago. Viewing 8 posts - 1 through 8 (of 8 total) Author Posts July 14, 2017 at 11:52 pm #6188 JulianParticipant Hey, Im having some problems with my B.face. The second row of keys (SHIFT,>,Y,X,C,V,B… (ISO-DE layout))are behaving very odd. I´m using the latest Bootloader aswell as the latest firmware and i loaded the correct keymap from your website. So i downloaded a virtual keyboard to find out which keys are being pressed when i press a key. I found out whenever i press the “B” key for example, all the keys above it and below it are also being triggered. When i press the “V” key these keys are being triggered: The “N” , “M” , “,” and “.” are the only keys that are working as intended. What could be the cause of this problem ? July 15, 2017 at 10:14 am #6189 firstname.lastname@example.orgKeymaster Hi Could you tell me your order number? July 15, 2017 at 11:02 am #6190 JulianParticipant #2955. this is a recent problem the keyboard was working fine just a while ago July 15, 2017 at 5:31 pm #6192 email@example.comKeymaster Hi Could you try the latest firmware with the latest BootmapperClient? (See http://winkeyless.kr/firmware-installing-and-setting/) Thanks. Hojin.Yi July 15, 2017 at 10:33 pm #6194 JulianParticipant As I mentioned in my first post, I am using the latest firmware and Bootmapper Client. July 16, 2017 at 3:46 pm #6198 firstname.lastname@example.orgKeymaster In the firmware folder there are 2 firmware files. – ps2avrGB_split_NKRO.hex (Wrong one) – ps2avrGB_NKRO.hex (Correct one) I guess you uploaded a wrong one(ps2avrGB_split_NKRO.hex). Thanks. Hojin.Yi July 17, 2017 at 4:00 am #6200 JulianParticipant I was very sure i used the right one… I tried again just now to be 100% sure and it seems to have fixed the problem. Thanks alot. July 20, 2017 at 2:18 am #6209 Garth ClardyParticipant I’m having the same issue except mine involves the “0)” column. “0” registers as “*-0”, “p” registers as “Page Up P”, “;” as “+;”, and “/” as “Page Down /”. As you recommend in this thread, I tried uploading the correct firmware and this didn’t fix the problem. Any idea what could have gone wrong? Thank you for your time Attachments:You must be logged in to view attached files. Author Posts Viewing 8 posts - 1 through 8 (of 8 total) You must be logged in to reply to this topic.