LEDS and ohms

Shop Forums QnA LEDS and ohms

This topic contains 2 replies, has 2 voices, and was last updated by  David 8 years ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3134

    David
    Participant

    Hey quick question. i have 830ohm resistors on my board and was wondering if emerald green LEDS would be fine for my keys? i know white and pink would be good but my theme aims for green. thanks in advance.

    • This topic was modified 8 years ago by  David.
    #3136

    Usually green 1.8mm LED uses 910 Ohm resistors.
    But ff your PCB is 60% style like B.face, the 820-ohm resistor can support all colors.

    830ohm?
    I think it will work.

    #3138

    David
    Participant

    [quote quote=3136]Usually green 1.8mm LED uses 910 Ohm resistors.
    But ff your PCB is 60% style like B.face, the 820-ohm resistor can support all colors.

    830ohm?
    I think it will work.

    [/quote]

    Awesome for the information 😀 im using the B.face 60% so im set to go. thanks again

Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘QnA’ is closed to new topics and replies.