Hand wire a key Shop › Forums › QnA › Hand wire a key This topic contains 5 replies, has 2 voices, and was last updated by Rhuarc86 5 months, 3 weeks ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts January 2, 2017 at 11:55 am #5038 Rhuarc86Participant The backspace key on my b.face x2 is not functioning. I have tried the other positions and it still will not work. Is there a way to hand wire it so the key will work again? January 2, 2017 at 12:14 pm #5039 email@example.comKeymaster Could you show me your pcb around backspace key? Thanks. Hojin.Yi January 2, 2017 at 11:02 pm #5046 Rhuarc86Participant This reply has been marked as private. January 2, 2017 at 11:03 pm #5048 Rhuarc86Participant All of the other keys work, just as an FYI. January 3, 2017 at 5:39 pm #5059 firstname.lastname@example.orgKeymaster Hi. 1. Please find out which line was cut in the pic I attached. And wire that line. 2. Probably you would have soldered the diode in the green circle wrong. Please re-solder it. Thanks. Hojin.Yi 파란 선이나 빨간 선 중 한 곳이 끊어졌을 겁니다. 확인하면서 연결해주면 될거고, 만약, 단 한번도 키 입력이 되지 않았다면, 다이오드도 납땜이 제대로 안됐을 수도 있으니 녹색 표시한 다이오드도 확인을 해보면 될겁니다. Attachments:You must be logged in to view attached files. January 4, 2017 at 2:25 am #5063 Rhuarc86Participant Thanks so much for your help! I think the diode is fine as the key was functioning at one point in time. Would it be good for me to replace it and see first? This reply was modified 5 months, 3 weeks ago by Rhuarc86. Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.