B.face PCB damage?

This topic contains 2 replies, has 2 voices, and was last updated by flashteker@gmail.com 8 years, 10 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
April 30, 2016 at 10:21 am #3483

SeanTNT
Member

Hello,
So I may have managed to damage the PCB as some keys are not working. Heres the PCB and if there is anyway to fix it that would be appreciated

April 30, 2016 at 10:25 am #3484

SeanTNT
Member

Repost:
https://www.dropbox.com/s/h44hvnuo4625e4g/IMG_0470.JPG?dl=0
https://www.dropbox.com/s/pgp6h1up0isbapj/IMG_0471.JPG?dl=0
https://www.dropbox.com/s/02ccv9jm2lr20n5/IMG_0472.JPG?dl=0

April 30, 2016 at 11:29 pm #3487

flashteker@gmail.com
Member

HI

Seeing your PCB, I could tell that you should check all switch soldering.

My best advice is
– Whenever you are done soldering one part, then check it works.
If you test it after soldering all, you can’t find which soldering is bad.

Anyway, the switch soldering looks not good.
– enough lead
– careful not to make short.

Thanks.
Hojin.Yi

Thanks.
Hojin.Yi
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘QnA’ is closed to new topics and replies.