Error in bootmapper

[appsParticipant]

Hi Winkeyless.

I have just set up a newly board with a 60% b.face. i had it working. but i got a error in bootmapper.

Its my first b.face pcb and first time in bootmapper. How can i reset? or do i need to reprogram all the keys?

Thanks!

https://www.dropbox.com/s/v6fp87pa4133sdg/bad.PNG?dl=0

• This topic was modified 7 years ago by  apps.

Attachments:

You must be logged in to view attached files.

[appsParticipant]

I used this guide and uploaded keymap_gb_EN_face_thumb(R)(X2).hex But the one listed in the guide is not part of the files in the DL. is this the correct .hex file to upload for the standard B.face 60% PCB with LEDs facing south?

• This reply was modified 7 years ago by  apps.
• This reply was modified 7 years ago by  apps.
• This reply was modified 7 years ago by  apps. Reason: TYPO
• This reply was modified 7 years ago by  apps.

[flashteker@gmail.comKeymaster]

Hi

Sorry for your inconvenience.

Do you want to upload firmware file or keymap file?

Firmware file is ps2avrGB_NKRO.hex.
The other files starting with “keymap” are keymap file.

Your keymap file is keymap_gb_EN_face_thumb(R)(X2).hex.

Thanks.
Hojin.Yi

 

 

 

 

[appsParticipant]

Hi Hoyin

Everything is working correctly. Thanks, got it sorted. I used the keymap_gb_EN_face_thumb(R)(X2).hex

A couple of questions if you don’t mind answer:

I bought a pre soldered B Face. Is it possible to enable the NCS Indicator lights on it so i can use them as layer indicates? and looking forward to be able to use the RGB lights for indication!  🙂

In the bootmapper software, in options > options: Can you explain what that section functions is? debounce, numlock layer, shift + esc )

Thanks!

[Author]

Posts