Firmware does not upload

[razgrizacesMember]

Hey guys, I’ve been using the board for about one week, and today it stopped working properly, as my OS did not recognize the device drivers for some reason. I’ve used http://winkeyless.kr/how_to_remove_driver/ and http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/, and it does not work. It will not recognize the board, even if it is powered. Is there anything I can do to fix it?

Thanks in advance.

Edit: I have since fixed the firmware issue on my keyboard. I have other issues, but I will see if I can sort them out. 🙂

• This topic was modified 8 years ago by  razgrizaces.

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Do you mean you resolved your problem?
Or you still have the problem?

Thanks.
Hojin.Yi

[razgrizacesMember]

Hey,

I have resolved the issue with the firmware, I had to reset the firmware on the board and then load the bootloader. I did have other issues with the board before, which were not resolved and are based on soldering and my errors.

Thanks for the response!

[Author]

Posts