Issues with bootmapper for b.pad

[Wei TsengMember]

Having the issue to upload the hex file. I can see the HIDboot under device when I connect to my computer. When I select the gb_pad hex file and upload it. end at xxx6800 and didnt say it is complete or not. But the bootloader restart, and my computer reconnect it. Still see it as HIDboot. Under your troubleshoot page, it says “If you see the “HIDBoot” in Control panel, the pcb is OK.” So I assume my soldering is correct? I only solder the MCU parts and RGB led.

Tried to connect USB2.0, USB3.0, USB hub. All the same. So I am not sure what is the problem right now. Please help 🙁

Order number #4373

Pictures

Thanks.

[Wei TsengMember]

Also one thing I want to point out is when I test all the components you sent me. “C3/4 are light gray” On the PCB, it says 18pF*2, but when I measure with multimeter. It is 0.3nF. Not sure if you change the design or not?

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

1. Firmware file is ps2avrGB_NKRO.hex.
The other files are for keymap.
Please see http://blog.winkeyless.kr/183

2. We didn’t change any spec for the parts including capacitors.
Please check you measured it correctly.

Thanks.
Hojin.Yi

[Author]

Posts