One row of RGB LEDs stopped working correctly

[kmeyer1394Member]

On my B87 mini ex one of the rows of RGB LEDs on the bottom of it stopped working correctly. I have them set to be alternating between purple and cyan, half of one color and half the other. When I turn my PC on they work normally but after about 30 seconds all of the purple ones on the row turn to white and the cyan one on the far right side turns to orange. If I turn the LEDs off and back on with the mapped key then they will work correctly again then turn to the wrong color again just like before. Also when I turn the LEDs off, the one on the far left side of the same row will turn blue and stay on. How can I fix this?

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

1. Did you upload a correct firmware?
Firmware is “ps2avrGB_NKRO.hex”, not the ones starting with “keymap_xxx”.
(For details, see http://blog.winkeyless.kr/183 )

2. Could you show me the keyboard LED settings in bootmapperclient?

Thanks.
Hojin.Yi

[kmeyer1394Member]

I’ve had the board for several months now and this only recently started happening for no reason. I turned my computer on one day and it happened and its been that way since.

 

This is a screenshot of the settings: http://i.imgur.com/Ei5oUDe.png

[flashteker@gmail.comMember]

Actually I am not sure what makes that problem.

If you feel uncomfortable in using it, could you send me to fix it?
(Please let me know your order number.)

Thanks.
Hojin.Yi

 

[kmeyer1394Member]

I think I’m going to try wiping it and re-uploading the firmware to see if that helps. If it doesn’t then I’ll email you.

[Author]

Posts