Resoldered b.face controller, 2 LEDs not working

Shop › Forums › QnA › Resoldered b.face controller, 2 LEDs not working

This topic contains 2 replies, has 2 voices, and was last updated by  flashteker@gmail.com 8 years, 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 20, 2016 at 7:17 pm #3188

    apolotary
    Participant

    Hello,

    I dropped my B.face today and a controller fell off the board, I soldered it back, but now two LEDs are still not working, what might be the problem?

    Here’s the album with photos, the two LEDs that are not working circled in red.

    http://imgur.com/a/M15Dn

    Thanks!

    March 20, 2016 at 10:52 pm #3191

    apolotary
    Participant

    Nevermind, just fixed it 🙂 turns out one of the LEDs got disconnected too, so I had to resolder it

    March 21, 2016 at 5:42 pm #3205

    flashteker@gmail.com
    Keymaster

    ^^;

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)

The forum ‘QnA’ is closed to new topics and replies.