Tex 60% compatibility

This topic contains 10 replies, has 3 voices, and was last updated by Mike 7 years, 10 months ago.

Viewing 11 posts - 1 through 11 (of 11 total)

Author

Posts
April 7, 2017 at 4:24 pm #5670

Mike
Member

Hello, I’m looking for a PCB for a Tex case. Anyone know if the B.Face R X2 PCB without RGB components would fit? Thanks!

April 7, 2017 at 5:15 pm #5671

flashteker@gmail.com
Member

Hi

Please see this : https://geekhack.org/index.php?topic=76809.msg1952384#msg1952384

– Anything Tex would have to be modified
– Stock pok3r cases may also need modding
– Basically anything with the horizontal stiffener ridges would need modification
– Lambo 60% will work (at least I hope so, since thats what i bought)
– Cases from Ziptyze (the 3d printed ones) should not need modding

Thanks.
Hojin.Yi

April 7, 2017 at 6:00 pm #5672

Mike
Member

Thanks, but that thread is asking about the RGB LEDs. I’m curious if it would work without the RGB LEDs.

April 7, 2017 at 7:55 pm #5673

flashteker@gmail.com
Member

They shared the opinions on whether to mod their cases for the RGB LEDs installed on B.face PCB.

So actually the list shows cases to fit B.face.

In the case of Tex case you don’t have to modify it if you don’t use RGB LEDs.

Thanks.
Hojin.Yi

April 7, 2017 at 7:57 pm #5674

flashteker@gmail.com
Member

Also see this http://imgur.com/a/0y2i2

April 8, 2017 at 3:29 am #5675

Mike
Member

Ok, I’ll try it out 🙂 Thanks 🙂

April 10, 2017 at 12:17 pm #5699

Matt Grech
Member

This reply has been marked as private.

April 10, 2017 at 4:13 pm #5701

flashteker@gmail.com
Member

It says it is compatible with FaceU.

If then, so does B.face.

Thanks.
Hojin.Yi

April 10, 2017 at 9:59 pm #5702

Matt Grech
Member

This reply has been marked as private.

April 11, 2017 at 4:11 am #5706

Mike
Member

I put in my order over the weekend 🙂 Can’t wait!

April 14, 2017 at 11:49 am #5725

Mike
Member

Just wanted to let you know the PCB fits perfectly. Super fast shipping, too. Thanks 🙂
Author

Posts