JTuu

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 22, 2016 at 7:06 am in reply to: RGB LEDs Not Working; Suspect PCB #4197

    JTuu
    Participant

    I solved it! The issue was with the signal out (bottom left in the image) pin of the previous LED, not with the broken one. I resoldered that pin and now it works perfectly!

    For anyone with RGB problems, note that the problem can be either on the first non-working LED OR on the last working one.

    July 22, 2016 at 6:21 am in reply to: RGB LEDs Not Working; Suspect PCB #4194

    JTuu
    Participant

    Here is the first non-working LED. It has a little more solder than the other ones because I thought maybe some connections weren’t made and added some solder to be sure.

    http://imgur.com/a/tqrZw

    July 21, 2016 at 3:01 pm in reply to: Desoldering RGB LED #4189

    JTuu
    Participant

    Never mind, I managed to get it by bridging the two contacts with solder.

    June 17, 2016 at 5:27 pm in reply to: Controller Only Soldering #3910

    JTuu
    Participant

    Okay, thank you for your reply!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)