ACE-XT40 hex file

Shop Forums QnA ACE-XT40 hex file

This topic contains 3 replies, has 2 voices, and was last updated by  VaclavKucera 6 months, 2 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #8453

    VaclavKucera
    Participant

    I recently attempted to flash my XT40 with QMK, but since I don’t have the correct pinout, I can’t set the rows and columns properly. Does anyone please have the stock hex file, so that I can return back to bootmapper? Alternatively, does anyone have any information about the pins on the pcb? Thank you

    #8455

    Hi

    I think you have a wrong number.

    Here is for Winkeyless not QMK.
    Even if you are using ps2averGB firmware, please contact a QMK provider.

    Thanks.
    Hojin.Yi

    #8457

    VaclavKucera
    Participant

    Hello,

    thank you for your quick answer. The XT40 is supposed to be flashed with ps2avrGB by default, the makers of the PCB said it’s based on the b.face. I’m just wondering if someone has more information about the pins of the PCB, or if someone has the default hex file for ps2avrGB.

    #8458

    VaclavKucera
    Participant

    I just tested the pins using a multimeter, if anyone’s interested the columns are [C4, C5, C6, C7, A4, A5, A6, A7, A3, A2, A1, A0] and the rows are [B0, B1, B3, B4]. The orientation is from top left corner (esc/tab).

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.