Caps lock LED b.face

[stabilizedParticipant]

Hi,

I have a quick question about the caps lock led on my b.face PCB. I soldered on a SMD resistor (870ohms) but it doesn’t seem to work. Tested the LED and resistor before soldering and they both were functioning, but when I plug it in in boot loader mode the LED doesn’t flash.
Do I maybe need to solder a resistor or some other part somewhere else to make it work?

Thanks!

[flashteker@gmail.comKeymaster]

Hi Stabilized.

I think you did all things necessary.

Do you check you plugged it in bootloader mode?
I guess it was not in that mode.

[FictiouzParticipant]

I’m actually having that same problem only my caps lock LED flashes when not in boot loader mode. When all the LEDs are set to ON the caps lock remains off and flashes occasionally, with no pattern. The caps position is centered and I check the soldering and ensured that there wasn’t an issue there

[flashteker@gmail.comKeymaster]

Hi

Sorry for your inconvenience.

Please check the soldering around the resistor of the LED.

If you can’t find anything wrong,
could you show me the PCB ?

Thanks.
Hojin.yi

[stabilizedParticipant]

Hi,

Here is a picture of the soldering on my Caps lock key. Not sure what is causing the problem, would appreciate some help.

Thanks!

Attachments:

You must be logged in to view attached files.

[Author]

Posts