[flashteker@gmail.comMember]

The popnut(rivet nut) will not spin, if you join the bolt(screw) tightly.

Couldn’t you fasten the screw tightly?

How was the other one?

 

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Slide something small to hold it not to move when screwing bolt.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

I think the bolt in the feet is loosely attached.

I guess the bolt was screwing endlessly.
It means the popnut was not stuck tightly.

I attached a pic.
Please stick the popnut with a stick like pinset through the side hole(I circled it in the pic),
and screw the bolt.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi.

1. Please find out which line was cut  in the pic I attached.
And wire that line.

2. Probably you would have soldered the diode in the green circle wrong.
Please re-solder it.

Thanks.
Hojin.Yi

 

파란 선이나 빨간 선 중 한 곳이 끊어졌을 겁니다. 확인하면서 연결해주면 될거고,
만약, 단 한번도 키 입력이 되지 않았다면, 다이오드도 납땜이 제대로 안됐을 수도 있으니 녹색 표시한 다이오드도 확인을 해보면 될겁니다.

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Sorry for bothering you.

Could you show me the parts around popnut?

[flashteker@gmail.comMember]

You mean the popnut in the pic I attached is wobbling?

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi, Happy New Year!!

Sorry for your inconvenience.

If the leds are blinking, most of the reasons are coming from bad soldering
– electric short, wrong direction(polarity)…

Please check solderings.

And could you tell me whether keyboard is working?

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Could you show me your pcb around backspace key?

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Happy New year.

Sorry for your inconvenience.

Could you show me what part has problem?

For the details, visit here http://blog.winkeyless.kr/207

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

You can choose all stuffs and options in online shop except soldering switches($31)

After placing an order, please send me an email(flashteker@gmail.com).

Then I’ll send you an invoice for the soldering switches.

But one wondering…

From your pic, you chose a set of in-switch LED.
Do you want me to solder them?
It is $27.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Happy Holiday!

Thanks for your interests in my products.
Here are my answers.

1. The key format in the pic is the exact one I want did I choose the right settings for this?

–> All things are correct but bottom row is 1.25+1.25+1.25+6.25+1.5+1.5

2. Will these keycaps be compatible besides the right shift?https://www.aliexpress.com/item/Backlit-Doubleshot-Gradient-PBT-Keycap-Set/32734342373.html

–> The R-shift length of the keycap set is 2.75. But the layout in the keyboard you showed me has 1.75 R-shift.
Surely you can ask me to make 2.75 R-shift. But then, it’s difficult to make “Up” key.
So please check if the keycap set has 1.75 R-shift one.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Happy Holiday!!

1st one
– Layer 1 (2T) : Matte Black
– Layer 2 (3T) : Matte Black
– (Diffuser)
– Layer 5 (5T) : Matte frost
– Layer 5-1(2T): Black opaque

2nd one
– Layer 1 (2T) : Matte Black
– Layer 2 (3T) : transparent
– (Diffuser)
– Layer 5 (5T) : Matte frost
– Layer 5-1(2T): Black opaque

3rd one
– Layer 1 (2T) : Black translucent
– Layer 2 (3T) : Matte Red(?)
– (Diffuser)
– Layer 5 (5T) : ?
– Layer 5-1(2T): ?

I recommend you to choose “Winkey” and “Majestouch style(Center)” spacebar.

Thanks.
Hojin.Yi

 

 

[flashteker@gmail.comMember]

Do you want to use my RGB controller(Attiny85) firmwae?

If then, yes you have to buy them from me.($2 per chip with firmware uploaded)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

1. For ps2avrGB firmware, you can use it not only for personal purpose, but also for business purpose.
It is under MIT license, so you should notice the origin.(You don’t have to ask permission.)
But you may not use the name “ps2avrGB” as a brand or model name like someone does it.

2. For RGB controller(Attiny85) firmware, you may not use it for business purpose. Since I’m selling it paid. The one way is to purchase the controller with firmware uploaded at $2.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

For acrylic housing CAD fiels, visit
http://blog.winkeyless.kr/208

For PCB layout and dimension, visit
http://blog.winkeyless.kr/151

For other information, visit

FAQ

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Mini-USB ^^

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Do you mean you detach some soldering pads ?

If then, some lines in PCB circuit were disconnected.

I think you should wire it directly.

The photos taken from phone are OK.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry.

Keyboard can’t be informed of the lock-screen event.
So it is impossible to set the RGB accordingly to the screen.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

I’ve implemented that function to the new version of firmware.

Please download again and test it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

1. Please check the soldering around the keys 7 and 8.
And tell me they are working.

2. Could you show me the PCB around the key 8 and “-“?
You’d better to see if there are electric short or disconnection.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Do you want me to solder your switches?

If then, send me an email.

 

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in my products.

1. Mini-USB

2. Yes it’s possible to install several types of switches in a board.

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

1. Could you tell me your order number.

2. Judging from your explanation, there must be some electric short.
Please check the soldering around the keys that make those problems.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Could you tell me your order number?

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry it’s not possible to add micro connector.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Here I attached the default setting of RGB LED.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

No. Mini-USB !

[flashteker@gmail.comMember]

I see.

If then, could remove a USB driver?
(http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/)

After that, re-plug your keyboard to your PC while pressing “U” key.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes.

You can select black one in the housing case item.

But it has a cross head, not hex one.

Thanks
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi Kevin.

I found your order(Order No. wp270).

Sorry for your inconvenience.

First of all you don’t have to upload the firmware again since it came out firmware flashed.

1. Didn’t it work before you uploaded firmware?

2. Did you upload the proper file(ps2avrGB_NKRO.hex)?
The other files are for keymap.

Thanks.
Hojin.Yi

 

[Author]

Posts