flashteker@gmail.com

Forum Replies Created

Viewing 30 posts - 1 through 30 (of 749 total)
  • Author
    Posts
  • in reply to: Bold cases stock #8857

    Really sorry.

    For a long time I’ve been looking for a good factory for the Bold case.
    But I can’t.
    It’s due to too high cost.
    I don’t think customers are willing to buy it paying that much.

    I hope you to understand that.

    Thanks.
    Hojin.Yi

    in reply to: Building Winkeyless layout #8803

    Hello.

    Sorry for late reply.

    If you select holtites and ask me to intall them,
    you don’t have to ask me to install switches.
    It’s quite easy. Just push switches into holtites.

    And at the moment I don’t have Gateron switches in stock.

    After placing an order of all stuffs and service,
    just let me know you want preinstalled holtites.

    Thanks.
    Hojin.Yi

    in reply to: Xmas Wishes :D #8782

    Hello.

    Sorry for late reply.

    I think I couldn’t meet any your wish.

    Sorry.

    Thanks.
    Hojin.Yi

    in reply to: Order #W8761 #8776

    Hello.

    Sorry for late delivery.

    Not it’s big vacation season, so everything is going slow.

    Thanks.
    Hojin.Yi

    in reply to: b.mini ps/2 support #8768

    Did you click the button “connect” at top left?

    Did you enter the bootloader mode by clicking the button “Set Bootloader” and set connection type?

    If then, did you connect your keyboard accordingly to your connection type(USB or ps2)?

    in reply to: b.mini ps/2 support #8764

    Did you try BootmapperClient?
    (https://winkeyless.kr/firmware-installing-and-setting/)

    You can set the connection mode by using it.
    (You can find it at the bottom of option menu. See attached file)

     

    Attachments:
    You must be logged in to view attached files.
    in reply to: B.pad case #8753

    Hello.

    Really sorry.
    At the moment I can’t offer the case of B.pad because of cost and quality problem.
    And I can’t tell you when it is available either.
    I hope you to understand that.

    Thanks.
    Hojin.Yi

    in reply to: Getting a seperate plate #8748

    Hello.

    The new aluminum plate doesn’t match old “BBB acrylic case” or old Diffuser.
    If you want it, you should get matching case body(diffuser).

    Thanks.
    Hojin.Yi

    in reply to: Order #W8676 #8742

    Hello

    Sorry for late update.
    Now I’m assembling your keyboard.

    I think I could ship within 2 days.

    Thanks.
    Hojin.Yi

    in reply to: Hotlites #8735

    Hello.

    First, place an order of stuffs – pcb, housing case and holtite.

    Then send me an email saying that you want holtite installing service.
    And I’ll send you an invoice for that.

    Thanks.
    Hojin.Yi

    in reply to: Hotlites #8730

    Hello.

    Yes it’s possible.

    If you want only holtites without installing, you can add them from holtite items separately(https://winkeyless.kr/product/holtite/).

    If you want me to install them, I’ll send you an invoice for that service.
    – install holtites for switch:$15
    – install holtites for in-switch LED:$15

    Thanks.
    Hojin.Yi

    in reply to: Question about TKL PCB #8706

    Hi

    If you select “SMT” option in a PCB item, it includes
    – Presoldered controller parts
    – Presoldered RGB LED parts(backside led)
    – Presoldered resistors/diodes

    You can also select “Soldering switches” and “soldering in-switch LEDs” when you add switches and leds. But you should add a housing case set.

    Thanks.
    Hojin.Yi

    in reply to: What do I need to solder with SMT? #8701

    Hi

    Thanks for your interests in my products.

    Surely you can use N,C, S indicators with in-switch LED.
    In this page(https://winkeyless.kr/soldering-guide/), you can find how to solder in-switch LED (find section “<Resistors to make Scroll Lock and Num Lock LED as Full LED>”)

    The both(in-switch and under keyboard) will work.

    Thanks.
    Hojin.Yi

     

    in reply to: Does the ATMEGA come with firmware? #8700

    Hi Sorry for your inconvenience.

    Yes all the chips are coming out with firmware uploaded.

    Please see this page : https://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/

    And check your soldering.

    Thanks.
    Hojin.Yi

    in reply to: Which color plate is this? #8677

    Yes. They have the same color.

    Thanks.
    Hojin.Yi

    in reply to: Which color plate is this? #8671

    Hi

    It’s silver one.

    Thanks.
    Hojin.Yi

    in reply to: bface leds gone bad #8670

    Hi

    Sorry for your inconvenience.

    I guess the first one in 4 not-working LEDs was broken.

    Could you replace it with a new one?

    Thanks.
    Hojin.Yi

    in reply to: IF Housings Plate Files #8669

    Sorry.

    I can’t give you the drawings of alu plate.

    I hope you to understand that.

    Thanks.
    Hojin.Yi

    in reply to: B.87 PCB vs B.87 R PCB #8664

    Thanks enderrrrr !!!

    in reply to: IF Housings Plate Files #8663

    Hi

    Yes it’s possible.

    You can see all the files here : http://blog.winkeyless.kr/190

    Thanks.
    Hojin.Yi

    in reply to: Bold 87 and 87 EX #8646

    Hi

    B.87 is Tenkeyless sized while B.87EX is full sized.

    Please see the photos in each PCB item page.

    For more details, please visit here : https://winkeyless.kr/the-stuffs-to-make-keyboard/

    Thanks.
    hojin.Yi

    in reply to: B.Face layout #8643

    Hi Thanks for your interests in my products.

    If you select “Universal layout” in case item,
    the plate will be cut to support all layouts.

    Thanks.
    Hojin.Yi

     

    in reply to: Bold Case – Face zeal60 #8637

    Hi

    Sorry. I’ve never get a zeal60 pcb in my hand.
    So I can’t tell.

    Thanks.
    Hojin.Yi

    in reply to: Bricked Keyboard After FW Update #8633

    Um…

    If you checked the crystal was broken,
    please let me know the result after replacing it with a new one.

    At the moment I can’t tell which part you should replace.

    And, please don’t reupload any SW such as firmware and keymap file.
    There is no problem. Doing that makes you confused.

    Thanks.
    Hojin.Yi

    in reply to: Buy Seperate Plate #8631

    Yes.

    Please let me know through Email.

    – layout and color
    – Delivery method : k-packet($16) or DHL($27)
    –  contact number

    Then I’ll send you an invoice through Paypal.

    Thanks.
    Hojin.Yi

    in reply to: Bricked Keyboard After FW Update #8619

    Hi

    Sorry for your inconvenience.

    I don’t think it has something to do with firmware or setting.

    But with bad connection of parts.

    Could you show me your PCB and tell me your order number?

    Thanks.
    Hojin.Yi

    in reply to: USB TYPE-C PCB UPDATES #8618

    Hi

    Yes. But I can’t tell you when.
    When I prepared, I’ll let you know.

    Thanks.
    Hojin.Yi

    in reply to: Buy Seperate Plate #8613

    Hi

    Sorry for late reply.

    Yes, you can.
    Price for a plate is like below

    * 87ex:$55.00
    * b87:$47.00
    * miniex:$52.00
    * mini, 22mini:$42.00
    * face:$39.00

    Thanks.
    Hojin.Yi

    in reply to: B.mini EX PCB base without plate for switches? #8603

    Hi John.

    It’s quite difficult to answer your question.

    I’m not sure how much strong meets your request.
    But I think a plate is essential not only to protect your pcb,
    but also to make key-stroke stable.
    So the stronger plate is, the better.

    And I don’t have any other case than Bold.

    I hope my answer would help.

    Thanks.
    Hojin.Yi

     

    in reply to: B.Mini EX – Numpad on Left Case #8561

    Yes, the plates have standard size.

    You can check it with drawings : http://blog.winkeyless.kr/208

    Thanks.
    Hojin.YI

Viewing 30 posts - 1 through 30 (of 749 total)