[flashteker@gmail.comMember]

Hi

Sorry we don’t have any future plan to make a PCB with that kind of layout.

And I don’t think it’s possible to modify the B.Face pcb to fit that layout.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Sorry for your inconvenience.

I am still looking for a good factory.

I can’t tell you exactly when to start.

I hope you understand that.
thanks

hojin yi

[flashteker@gmail.comMember]

Hi.

Please visit to see the difference between BBB acrylic case and BBB acrylic case with RGB Diffuser here: http://blog.winkeyless.kr/186

And it’s BBB acrylic case with RGB Diffuser for B.face X2.
Layer colors…
– layer 1 : matte black
– layer 2 : transparent
– layer 5: transparent
– layer 5-1 : matte frost

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry I can’t guarantee it.

(I ‘heard’ that it fits into poker3 case with small modification.
But it’s not official.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I’will answer it through email^^

[flashteker@gmail.comMember]

Yes. it’s possible

Please send me an email(flashteker@gmail.com)

 

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

1. Firmware file is ps2avrGB_NKRO.hex.
The other files are for keymap.
Please see http://blog.winkeyless.kr/183

2. We didn’t change any spec for the parts including capacitors.
Please check you measured it correctly.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

After some investigation, we found that it is not from the firmware, but hardware.
If there is not enough electric currency, your problem happens.

I still have to find out why device dependency exists.
Some computer works, other not.

And I don’t know yet I could solve it or not.

Temporary solution is to connect it with power USB hub.

I’ll keep an eye on this problem.
And let you know the result.

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

Hi

 

It uses mini-USB.

And you can see the difference here
http://blog.winkeyless.kr/186

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

DIY kit – Excellent choice!

You can see all the parts and options here http://winkeyless.kr/the-stuffs-to-make-keyboard/

You can purchase all stuffs except keycaps and power cable.

Yes just a PCB and a set of Housing case are enough.
– a PCB in which you can choose all parts
–  a set of housing case in which you should choose layout and layer colors

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Yes, I’m sure your switches work with my PCBs.

And for  the stabilizer, you need PCB mounted one.
(Winkeyless also offer stabilizers.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes, you can see them in this page(http://winkeyless.kr/product/1-8mm-led/)

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Oh… sorry.

I guess it could be due to a firmware bug.

I’ll investigate it as soon as possible,
and let you know the result.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Answered Through Email.

[flashteker@gmail.comMember]

Sorry for your inconvenience.

I will stock Gateron Yellow again in a month.

But I won’t Gateron Clear.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for saying this.

At the moment, you can’t set it like that.

But  I will think of it for the next version.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in my products. Here are the answers

1) I haven’t been able to locate a good aluminum/acrylic/sturdy-material no-bezel floating key case that I can match both a 75% b.mini board and a b.pad. Does such a thing exist? Here’s an example of the style I am looking for, but I want black in color; http://imgur.com/a/q9r2L
–> I’m offereing 2 types of housing cases – BBB acrylcic case(http://winkeyless.kr/product/bbb-acrylic-case/) and BBB acrylic case with RGB Diffuser(http://winkeyless.kr/product/bbb_acrylic-case-with-rgb-diffuser/)  I’m not sure it’s the case you want.

2) Is there any way to get USB pass-through on the b.mini and/or b.pad? It’s a want feature, not a need, so I won’t work too hard for it. Would be nice for cable management.
–> Sorry no. They have separate USB connector and should be connected directly to a PC.

Also while I’m posting I guess I should ask and make sure, just to double triple check… b.pad outputs numpad codes, correct?
–> Yes

And also I will be adding white back-lighting to all of the keys, this is supported on b.mini and b.pad correct?
–> Yes

Thank you for your time!
–> You are welcome

 

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

I guess they would work, if they are Cherry MX compatible.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes you can.

But
1. You have to ask “soldering switches” separately after placing an order for other stuffs and options. (http://winkeyless.kr/how-to-order-a-fully-completed-keyboard/)
After placing an oder, please let me know(flashteker@gmail.com),
then I’ll send an invoice through Paypal.

2. It is $20 (if Cherry MX, it’s $17)

3. It will take 50 days to ship if you include “soldering switches”

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Yes It’s possible.

Your order number is w4492, right?

Then, I’ll let you know how to resend it to me and the cost by email.

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.
Yes it is possible to order a fully completed keyboard.
The way of ordering a fully completed keyboard is almost same as ordering stuffs,  but needs one more step – asking for below services separately.
– Soldering switches (necessary for a fully completed one)
– Soldering in-switch LEDs (if you need)

[Ordering PCB and Housing case]

First of all, please see what you need to make a fully completed keyboard at http://winkeyless.kr/the-st uffs-to-make-keyboard/
Select PCB with all stuffs and options(B.87EX X2, B.Mini EX X2, B.87EX(R or Non-R), B.Mini EX(R or Non-R), B.Face EX, B.Pad EX)
Select a housing case (BBB acrylic case or BBB acrylic case with RGB Diffuser)
Place an order and procede payment like normal order.
[Ordering extra services)
After finishing ordering, tell me what you want as extra service by email(flashteker@gmail.com).
– Soldering switches ($22 for B.87)
– Soldering in-switches(if you want) ($22 for B.87)
I wil send you an invoice for the charge of extra service through Paypal.
You pay it
Done.
Please keep in mind that it would take 50~60 days to ship your order if you include “soldering switches”.

If not, it usually takes 3~4 weeks.
Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for late reply.
(It’s Lunar Thanksgiving holiday in Korea.)

Anyway…
1. Most of cases a PC can’t recognize your keyboard are due to bad soldering.
Could you check your soldering?
(http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/)
2. Could you tell me your order number?

3. Could you show me your PCB?

4. You can check whether your PCB is working or not.
(http://winkeyless.kr/how-to-check-a-pcb-is-working/)
It just shows that ONLY PCB is fine.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for late reply.
(It’s Lunar Thanksgiving holiday in Korea.)

Anyway…
1. Most of cases a PC can’t recognize your keyboard are due to bad soldering.
Could you check your soldering?
(http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/)

2. Could you tell me your order number?

3. Could you show me your PCB?

4. You can check whether your PCB is working or not.
(http://winkeyless.kr/how-to-check-a-pcb-is-working/)
It just shows that ONLY PCB is fine.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

It’s “orange translucent”.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Oh…

The first “Switch” is a kind of big title(category) – stuffs related to “Switch”.

The Second is for real MX switch.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

1. You can see all sample keyboards in each PCB item.

2. If you want to see the raw acrylic color, please visit http://www.hanaacryl.com/product/?s_category=85

3. If you want to see the difference between normal acrylic case and Diffuser, please see http://blog.winkeyless.kr/186

4. If you want to see the difference of frost, matte and transparent, please see http://winkeyless.kr/case-color/

 

And could you tell what you mean by “switch switch”?

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

HI

Sorry for your inconvenience.

I don’t have fixed date to re-launch aluminum plate.

But in the near future.

I’ll let you know when I’m ready.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

HI

Sorry for your inconvenience.

If you use 2.25 LShift, just ignore 1x key(Europe2).

That’s it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I think there would be problems in RGB controller.
Could you show me the pcb around RGB Controller?

And please check the RGB LEDs. If the first one is wrongly installed, the rest of them will not work either.
They are working in sequence. It means one RGB LED is working by getting signal from previous one.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.
There is no special tips for soldering RGB LEDs

1. Could you tell me your order number?

2. Did you solder RGB LED controller from me?

3. Could you show me your PCB?

Thanks.

Hojin.Yi

[Author]

Posts