[flashteker@gmail.comMember]

Hi

Are you using a PCB from “winkeyless”?

Then you don’t have to worry about it.

Our pcbs support both type.

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

Hi

You need
– 1.8 mm LED(in-switch LED)
– Resistors

If you see the bottom of this page(http://winkeyless.kr/soldering-guide/),
you can see the half-soldered resistors.

When you order a PCB from me,
I half-solder them.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi All Dear.

Please Read this.

The reward offer is applied only to Krustyboomer.

You know…
It would make me bankrupt because I already spent.

Please understand me.

But I can tell you I’m always trying to make the cost down.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi BlueNote.

Sorry it’s not possible.

And we don’t recommend to cutout the plate to support a switch top removal.
Because I could make the switch wobble.

Thanks.
Hojin.yi

[flashteker@gmail.comMember]

-_-;
Hi Hhu94.
Please send me an email ^^;

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Not yet.

I’ll open it in a near future.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Um…

I think it’s not due to S/W nor setting.
But hardware problem.

If you can’t replace the RGB LED parts,
could you send it to me?

Please email me “flashteker@gmail.com”.

Thanks.
Hojin.Yi

• This reply was modified 8 years, 8 months ago by  flashteker@gmail.com.

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Could you tell me your order number?

[flashteker@gmail.comMember]

Hi Truspeed.

It depends on what you ordered.

For some stuffs in stock I can ship them right away.

But some others with a housing case or soldering service, it will take longer.

Please understand me.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Thanks ^^

[flashteker@gmail.comMember]

Yes it’s possible.

But you have to ask them separately.
The price of top layer is

– B.87EX / B.mini Ex : $16
– B.87/B.mini/B.face : $14
– B.pad : $8

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Now I placed an order of a sample case.

Not too far.

When I’m ready, I will let you know.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry I don’t have it yet.

But what about giving you 10% reward if you send me a few photos after assembling a keyboard from me?
(I will use them in my gallery.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry…
In-switch LED can’t have RGB effect.
It has only single color.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi
Sorry for your inconvenience.

Please check the soldering of 11th RGB LED.
RGB LEDs are working in sequence so if 11th is wrong, the rest of them are not working.

Or Could you check the number of RGB LED set in BootMapper Client program?

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi

Yes I think you selected all for a keyboard.

But it doesn’t not include the service “soldering switches”.
It is up to you.
If you need that service, you have to ask separately.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I also received defected acrylic case last week.

Next week I could ship.

Sorry for late delivery.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

sorry for late reply.

You have to tell me the layout you want.

Could you send me an email?
(flashteker@gmail.com)

[flashteker@gmail.comMember]

Ho… mistake

Soldering controller parts is $12 for B.face X2.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Um…

I’ve kept looking for a way to make the price down.
So I made 2 options – DIY and SMT.

Anyway… it is possible to solder only controller parts($8)

After selecting DIY options, just let me know.

thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Clee204.

Could you tell me your order number?

[flashteker@gmail.comMember]

Hi Kyle.

All the acrylic cases I received this week had a some defects.
So I requested new replacements.

Next week I could ship your order.
Please understand me.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Here I attached price break-down.

If you ask me to change the spring of switch, you should add $22 including spring.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Sorry.

We don’t offer purple color any more.

I attached transparent sky blue color.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi

The housing case is similar to BBB acrylic case(http://winkeyless.kr/product/bbb-acrylic-case/)

The options would be like the pic attached.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Thanks for your understanding ^^

[flashteker@gmail.comMember]

Oh Kyle.

Sorry for late update.

We usually don’t inform on proess except shipping.

It usually takes 3 weeks to get an acrylic housing case from a factory.

So I could ship your order next week.

Thanks.
Hojin.Yi

P.S Yes I’ll ship it by Express delivery method such as DHL.

[flashteker@gmail.comMember]

Desolder all RGB LEDs and test if your keyboard works.

If it works, then solder a RGB LED one by one checking it is OK.
(If it doesn’t work, then check the Controller parts.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Thanks Shangrila500!

Hi bosstoise

Attached files show all you need except “soldering switches”.

For soldering switches, you should ask it to me separately.($17)

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi

From your vidoe, there would be some faulty RGB LEDs.
(Broken LED or wrong soldering)

Could you tell me your order number?

Thanks.
Hojin.Yi

[Author]

Posts