[flashteker@gmail.comMember]

Hi

Recently it takes 4 weeks to make a set of keyboard, since the case manufacturer is quite busy.

I usually ship package by DHL and it takes 2 ~ 5 working days for delivery.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Thanks Stabilized ^^

Just someone said that with some cutouts.

Officially I can’t guarantee.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Oh… one more thing.

You need sub mcu(attiny 85) to control RGB LED and firmware for it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Um…

As I said… I’m not sure.
If your case is same as Poker’s, then it could fit.

But I can’t tell you officially.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

The RGB LED we use is WS2812B.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

I’m not sure. But I don’t think b.face case fit KC60.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

– Layer 1 (2T) : Matte Black
– Layer 2 (3T) : matte transparent (or matte frost)
– (Diffuser)
– Layer 5 (5T) : Matte frost
– Layer 5-1(2T): Black opaque

Sorry long time ago I made it.
It’s hard to tell colors just by seeing photo.
But…. Matte transparent is most likely…

For the other color, see http://winkeyless.kr/case-color/
or http://www.hanaacryl.com/product/?s_category=85.
(Sorry for not parparing many sample photos of layer colors)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes you can order only each layer.

The price per layer would be like this.
– B.87EX/B.miniEX : $12
– B.87/B.mini : $10
– B.face/B.thumb : $8
– B.pad : $4

Just place an order of housing case as usual and send me an email.
Then, I’ll refund the differences.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Oh…

There must be some electric short.
First check the direction(polarity) of RGB LED(< -- it is the usual case when voltage overflow.) (To check it is the reason, desolder all RGB LEDs. And replug your keyboard to PC.) Or ... um... Check the all soldering points(pads) if there is short. If it doesn't work, could you send me some photos? My email is flashteker@gmail.com.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry
Our case doesn’t fit Phantom PCB.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry no.

[flashteker@gmail.comMember]

Hi

I see why you added resistors.

And
Sorry you can’t remove the top of switches until you desolder them.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

I think your order is almost perfect for a full keyboard.
But one weird thing.

You didn’t choose in-switch LED, but soldering resisters which are used for in-switch LED.
If you don’t want in-switch LED, you don’t need soldering resistors.

And your order is a kind of full-assembly.
In addition, there will be a boxing day period.
So it will take 4~5 weeks.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

As I said previously,
I don’t think the plate could be compatible with our other layers including diffuser.

B.face pcb could fit the plate you linked.
But our case doesn’t.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I think it doesn’t fit B.face’s other layers.

I can’t guarantee.

Please ask it to the seller of that plate.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I’m not sure either.
You have to check the screw hole positions.

Thanks.
Hojin.Yi

P.S : Thanks Gracz for answering instead of me ^^

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

The housing case you picked is “BBB acrylic case”(http://winkeyless.kr/product/bbb-acrylic-case/)

The options are
Model:B.87/B.87R/B.87 X2/B.87R X2
Screws:Black(cross screw)
Enter Type:ANSI
Left Shift:2.25x
CapsLock Position:Majestouch(Center)
Space Row:Winkey
Space Switch Position:Majestouch(Center)
Color Layer 1(2T):matte black
Color Layer 2(3T):matte frost
Color Layer 3(5T):matte frost
Color Layer 4(3T):matte frost
Color Layer 5(5T):matte frost
Color Layer 5-1(2T):matte black

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Nice to hear you fix it.

ps2avrGB_NKRO.hex is firmware file.

Other files are for keymaps.
– keymap_gb_B87(EX).hex : Key map for B.87, B.87 EX, B.mini, B.mini EX
– keymap_gb_face_thumb.hex : Key map for B.face, B.thumb
– keymap_gb_pad.hex : Key map for B.pad

For details, see http://blog.winkeyless.kr/183

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Could you upload a default keymap file(keymap_gb_face_thumb.hex) we provide?
And check it works.
If it works, there are some mistakes in keymapping.

And you can’t upload hex file in this site.
Could you send it by email?

My email is “flashteker@gmail.com”.

And tell me your order number.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Also I added a post on B.pad keymap at http://winkeyless.kr/b-pad-keymap/

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

1.I have the B.87 and B.Pad, I don’t think I’m able to customize the RGB and LED settings on both since they are both connected. Do you have a solution?
–>You can set the RGB and LED settings for B.87 and B.pad separately.
(especially for B.pad, there is no short key. So you have to use BootmapperClient or make a keymap.)
If you are asking that setting B.87 will change B.pad,
it’s impossible.

2.Also, is there a way to make keyboard LEDs sleep when computer is asleep? Sometimes all the LEDs turn off when I sleep computer, but other times it stays on. Sometimes if LEDs turn off, they turn back on randomly.
–> I’ll check the firmware. I think it will take a while to investigate it.
I promise I’ll let you know the result.

3. Last thing- I am having a really hard time figuring out shortcut keys to easily turn on/off RGB case LEDs, and in-switch LEDs. Is it even possible?
–> ESC+Capslock for LED mode. ESC+shift+Capslock for RGB mode
for details, see http://blog.winkeyless.kr/185

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Thanks for your kindness ^^

I’ve already posted it (http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/)

But probabably because of my poor English writing, people don’t look at it ^-^;

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Nice to hear you fixed it.

But I think Windows 10 is irrelevant.

I think you uploaded a wrong firmware and plugged your keyboard.
At that time PC detected a different device and installed a wrong driver.

Anyway I will research the OS relevance.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Did you upload a proper firmware?
Firmware is “ps2avrGB_NKRO.hex”, not the ones starting with “keymap_xxxxx.hex”.
(See http://blog.winkeyless.kr/183)

Please let me know the result.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

1. If I want the bottom plate to be black, what do I have to do? Or is it not possible?
–> Sorry only matte-frost. The case you were seeing is “BBB acrylic case and RGB Diffuser” which is usually used for RGB light effect. So if it’s not white-tinted one, the color of light would be distorted.
If you want black color, you can set the RGB LED color to black-tinted one.

2. can someone please explain what parts 5 and 5-1 are? I don’t understand. :c
–> Those are for feet. In the middle of page, you can see the feet which are composed of 2 layers, innter and outer layer.
(http://i0.wp.com/winkeyless.kr/wp-content/uploads/2015/01/20150913_134058_0022.png
http://i1.wp.com/winkeyless.kr/wp-content/uploads/2015/01/DSC_1912.jpg
http://i1.wp.com/winkeyless.kr/wp-content/uploads/2015/01/DSC_1910.jpg)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Could you upload new firmware by using BootmapperClient program?
(For details http://blog.winkeyless.kr/183)

If it doesn’t work after uploading it, then please check the soldering of your RGB LED parts.
(For guide of soldering http://winkeyless.kr/soldering-guide/)

RGB LED has direction.

I hope it helps.

(Please let me know the result.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

If a Keyboard is flashing and doesn’t work, it means it entered bootloader mode. There would be an electric short around LCtrl or LWin switch.
To check it, just desolder both switches, and replug your keyboard.
If it’s working, the problem is due to bad soldering of two switches.

Please tell me your test result.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

The options for the keyboard you linked to are like followings.

BBB Acrylic Case with RGB Diffuser
Model:B.face/B.face X2 + $32.00
Screws:Silver(hex screw, +$0)
Enter Type:ANSI
Left Shift:2.25x
CapsLock Position:Cherry(Off Center)
B.face/B.thumb Space Row:blank+1X+1.5X+7X+1.5X+1X+blank
BackSpace:2x
R Shift:1.75x + 1x
Color Layer 1(2T):matte frost
Color Layer 2(3T):matte white
Color Layer 5(5T):matte white
Color Layer 5-1(2T):matte frost

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

The cost is depending on your preferences.

Anyway here are break-down.

1. PCB
B.miniR X2 PCB : $41
Soldering Controller Parts: + $6.00
RGB LED Parts and Soldering: $19.00
Switch:Blue(PCB-mounted) + $58.00
Soldering Switch: + $22.00
1.8 mm In-Switch LED:White + $13.00
Soldering In-Switch LED: + $19.00
Stablilizer:Winkey Style + $8.00
Diodes and Soldering: + $20.00
Resistors and Soldering: + $17.80

2. BBB Acrylic Case with RGB Diffuser : $70
Model:B.mini/B.miniR/B.mini X2/B.miniR X2
Screws:Silver(hex screw)
Enter Type:ANSI
Left Shift:2.25x
CapsLock Position:Majestouch(Center)
B.mini/B.miniEX Space Row:1.25X + 1.25X + 1.25X + 6.25X + 1X + 1X + 1X
Space Switch Position:Majestouch(Center)
Color Layer 1(2T):matte frost
Color Layer 2(3T):matte frost
Color Layer 5(5T):matte frost
Color Layer 5-1(2T):matte frost

And shipping to PHilippines is $20.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

The keyboard you linked to is B.face which has no f1 key.
But you use “Esc” key as “F1” by pressing FN key.

Do you mean it?

Thanks.
Hojin.Yi

[Author]

Posts