[flashteker@gmail.comMember]

Your keycap set supports all layouts for B.mini X2.

Actually supports all sizes of keyboard.(full, 90%, TKL, 75%, 60%, num pad…)
Also winkey(6.25U spacebar) and winkeyless(7U spacebar)

If you want to make B.mini with your keycap set,
you can make all B.mini supporting bottom row.

– 1.25 +1.25+1.25 + 6.25+1+1+1
– 1.25 +1.25+1.25 + 6.25+1.5+1.5
– 1.5 +1.5+7+1+1+1
– 1.5 +1.5+7+1.5+1.5

Conclusively you don’t have to worry about layout with your keycap set.
Just select a layout you want.

 

[flashteker@gmail.comMember]

Hi

Yes it’s possible.

After placing an order of all stuffs and options, just send me an email.
Then I will send you an invoice for “soldering switches”(cherry $22, gateron $25) and “soldering in-switch LEDs”(cherry $22, gateron $25) through Paypal.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

This reply has been marked as private.

[flashteker@gmail.comMember]

Sorry for your inconvenience.

You can buy it.

It is $31 per pcb including controller parts.

If you want to ask me to solder controller parts, $10 will be added to each pcb.

Please let me know your paypal account, then I will send you an invoice through paypal.

thanks

hojin.yi

[flashteker@gmail.comMember]

Hi

We offer 2 kinds of housing case.
– BBB acrylic case(http://winkeyless.kr/product/bbb-acrylic-case/)
-BBB acrylic case with RGB Diffuser(http://winkeyless.kr/product/bbb_acrylic-case-with-rgb-diffuser/)

You can see the difference here http://blog.winkeyless.kr/186.

I have no video for a specific housing case.
But you could find them from lots of internet communities such as Geekhack and Reddit.

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Hi

I heard that someone did that.

But officially I can’t guarantee it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

First of all, the menu “default num of LED” doesn’t have anything with your problem.

How many LEDs did you set for the menu “Num of RGB LEDs”?
If you set it right(16), I think it is mainly due to bad soldering(Yes I know the PCB was out with presoldered.)

Could you check the soldering of the last working RGB LED and the first non-working RGB LED?
(In your case, 11th and 12th RGB LEDs)

If you are not able to check the state of soldering, then send me an email(flashteker@gmail.com)

Thanks.
Hojin.Yi

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Could you tell me your order number?

[flashteker@gmail.comMember]

Hi

You uploaded a wrong firmware.

In the pic of bootmapperclient, you can see “ps2avrGB4U” at the top-right corner.

Please upload a proper proper firmware(ps2avrGB_NKRO.hex)

(Yes use the button “firm up”.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Could you try to upload a firmware? Your firmware is ps2avrGB_NKRO.hex (http://blog.winkeyless.kr/183)

If the bootmapperclient program can’t recognize your keyboard, please see http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/.

And finally… could you show me your PCB with parts soldered?

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Could you tell me your order number?

[flashteker@gmail.comMember]

Hi

Sorry for late reply.

1. I think the color of 1st layer(2T) is matte frost and 2nd layer(3T) is matte black.

2. If you don’t ask me of “soldering switches”, it would take 3 weeks.
(If do, longer than 50 days.)

3. it says it is using MX clear.(I can’t tell by seeing this pic.)

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

Hi

Yes you can ask me “soldering switches” paying extra charge.

But
1. It will take 90 days if you ask me “soldering switches” because there are so many order in front of you. (If not, it usually takes 3 weeks.)

2. After placing an order of all other stuffs and options, ask “soldering switches” separately by email. Then I’ll send you an invoice through Paypal.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests my products.

Yes, you chose all stuffs for a full keyboard except keycap and cable.

And the rest thing you will have to do is “soldering switches” and “soldering in-switch LED”.

And I will ship your order by DHL.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for late update. Tomorrow I’ll ship your order.

The reason I removed “R” PCB is not to confuse users. Still it is possible if they ask it separately.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

HI

The housing you showed me is “IF” model which we don’t make anymore.

The housing models currently available are

– BBB acrylic case with RGB DIffuser(http://winkeyless.kr/product/bbb_acrylic-case-with-rgb-diffuser/)

– BBB acrylic case(http://winkeyless.kr/product/bbb-acrylic-case/)

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Sorry for making you wait too long.

It’s not easy job to optimize the quality and price.

I hope and expect I could re-offer it in a month.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

OH No.

Please don’t do that. It could make a crack.

Probably it will work. But I can’t guarantee it.

Officially…. NO!.

Thanks
Hojin.Yi

P.S Sorry for late reply. I’m just back from summer vacation.

[flashteker@gmail.comMember]

Hi

Plate mounted switch doesn’t have additional legs to hold PCB tight.
So the hole of plate is supposed to do that job. But a hole supporting a stabilizer can’t hold switch tightly enough.
In that case, you should solder switch hard after putting a stabilizer and keycap.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

The lead time is

1. PCB with SMT option (+ only stuffs like switches, in-switch LEDs..)  – 1 weeks.

2. if including a housing case – 3~4weeks.

3. if including soldering switches (+ soldering in-switch LEDs, lubing switches) – 50 days.

And delivery time by

– DHL : 2~3days

– k-packet : 7 ~ 14 days

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

 

Still looking for new RGB Diffuser case maker.

Please be more patient.

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

The housing case is “BBB acrylic case with RGB Diffuser” whose 3rd layer is RGB Diffuser.
(http://winkeyless.kr/product/bbb_acrylic-case-with-rgb-diffuser/)

Layer 1(2t) – matte frost
Layer2(3T) – pink opaque
<Diffuser>

Layer5(5T, inner feet) – ?
Layer5-1(2T, outer feet) – ?

 

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

Oh…

The PS/2’s permitted electricty is a half of USB’s.

So it can’t light up both RGB and in-switch LEDs.

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

Hi

Only a PCB  with SMT is ready to ship.

But a housing case is not.

[flashteker@gmail.comMember]

Hi

Sorry for late reply.

SMT is
– all parts presoldered in a process of mass production. So I can reduce the price.
– R version is not popular one. So I can’t produce them in a mass. I have to solder all parts manually.

I hope you understand that.

Resistor value is 820 ohm which supports all colors.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

It’s not far.

I’ll let you know when I’m ready.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for confusing you.

SMT option is including all parts presoldered.

– diode presoldered

– controller parts presoldered

– resistors presoldered

– RGB LED parts(RGB LEDs + sub controller) presoldered.

(But switches and in-switch LEDs are not included.)

And didoes are necessary for switches.

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

Hi sorry for your inconvenience.

You don’t have to order with me.

You can find them easily around you.

I attached a photo of the screws.

 

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi

You can see the total price after putting stuffs in a cart.

You can the matte black color clearly here : http://i2.wp.com/winkeyless.kr/wp-content/uploads/2014/12/B_MINI_0474.jpg.

(it’s not slippery)

If you select colors like that, your housing case will look black with Matter frost body(diffuser)

And..

Yes all the left stuffs are keycap and cable.

But you have to solder switches by yourself.

 

Thanks.

Hojin.Yi

[flashteker@gmail.comMember]

Could you tell me which firmware upload?

(Correct firmware is ps2avrGB_NKRO.hex.)

I guess you uploaded the firmware for split one.

 

Thanks.

Hojin.Yi

[Author]

Posts