[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

I think the firmware is not a problem.

1. Could you try to upload the firmware(ps2avrGB_NKRO.hex) in bootloader mode?

2. Did you try to upload a keymap file “keymap_gb_EN_B87(EX)_mini(EX).hex”?

Please let me know the result.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I think there is electric short between “+” in pad and LED hole.

See the attached photo.

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi

A bad new and a good news!

* Bad news: No. the remains of miniEX without the numpad doesn’t fit a mini case.

* Good news : In a near future I’ll offer the “Bold” case for B.miniEX ^^
(Please a little more pationt.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

안녕하세요.

네 가능합니다.

–  만약 사시는 곳이 미국이면 지정한 미국내 배달지로 보내주세요. 무료로 한국으로 보낼 수 있습니다.
(물론 미국내 배달지까지는 지불하시구요.)
– 납땜비용이 zealios는 cherry에 비해 10% 더 비쌉니다. 감안해 주시기 바랍니다.

감사합니다.

P.S:한국말로 하니까 편하네요.

[flashteker@gmail.comMember]

Hi

After placing an order, just let me know your address.

Then I’ll refund the difference.
(Domestic delivery is $3)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

I think your board is 22mini-ex which has nothing to do with Winkeyless.

Please contact

http://22kbd.com/

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

It uses maximum 500mA .

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

As you see, all of pcb items have some photos assembled in their item page.

And the looking difference between R and Non-R is not big.
So I think the close up image is more important.

Anyway…
If there is a person who asks more photos, I let him/her know : https://drive.google.com/ drive/u/0/folders/0Bx1Lcjc- gPfnX01McTZBNkNZdUk

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Really sorry.

At the moment I don’t have plan to produce the Bold cases for B.87EX or B.miniEX.

I hope you to understand that.

But if there are lots of request, I’ll think of it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry for your inconvenience.

First of all you soldered RGB LEDs in the wrong direction.

After correcting it, please let me know other problem.

And… most of parts seem bad in soldering.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

If you can’t get into bootloader mode,
reconnect it while pressing LCtrl.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Did you upload the correct firmware?(ps2avrgb_NKRO.hex)

In the tap “Options”, you will find the section “Utils”.
In that section you can upload the firmware file after entering bootloader mode.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I think you downloaded a wrong firmware(ps2avrGB4U).

Please download this file(https://github.com/showjean/ps2avrU/releases).

– Your firmware file is “ps2avrGB_NKRO.hex”.

– Keymap one is “keymap_gb_EN_face_thumb(r)(x2)..hex

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Sorry for your inconvenience.

Could you tell me your order number?

Anyway….

It’s quite easy to upload keymap file.
(First of all, download BootmapperClient and firmware files : http://winkeyless.kr/firmware-installing-and-setting/)

1. Open BootmapperClient.

2. Press the button “Load .hex/.json”

3. Choose proper keymap file.

 

4. Press “upload” button.

and your firmware file is “ps2avrGB_NKRO.hex”

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

Hi

You can set all the properties and change keymap by using UI S/W “BootmapperClient”(http://winkeyless.kr/firmware-installing-and-setting/)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes that is right.

That is WS2812B.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Oh…

Sorry for your inconvenience.

I think the one was out of order.
It should be replaced.

If you have someone around you to help soldering,
you can easily replace it with a new one.
(Surely I’ll pay for the cost.)

If not, you had better to send it back to me to fix it.

Could you tell me your order number?

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.
I think some HID drives are making a conflict with your device.

1. Could try to connect it to other USB port?
If it doesn’t work,

2. Could you remove HID drive and replug it again?
(Please see No 4. in this page : http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry I don’t have any information on where to get a aluminum case.

But I expect I could offer a new case with aluminum plate and diffuser body.
I’ll let you know when to be available as soon as possible.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Do you want to upload firmware file or keymap file?

Firmware file is ps2avrGB_NKRO.hex.
The other files starting with “keymap” are keymap file.

Your keymap file is keymap_gb_EN_face_thumb(R)(X2).hex.

Thanks.
Hojin.Yi

 

 

 

 

[flashteker@gmail.comMember]

You can choose only blank+1 +1.5+7+1.5+1+blank a HHKB style.

No 6U space.

[Edit]

Actually it’s possible to make blank+1 +1.5+6+1.5+1+blank case.
But I don’t have 6U stabilizer set.

Thanks.
Hojin.Yi

• This reply was modified 7 years, 4 months ago by  flashteker@gmail.com.

[flashteker@gmail.comMember]

Sorry.

I’m not sure which one was retooled.
I attached a photo which shows the switches in my stock.

Anyway… they are all genuine Cherry one.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

I think the LED was broken.

Could you replace it with a new one?
If not, you should send it back to me to fix it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry.

I don’t have the diffuser for B.mini Ex anymore.

I hope you to understand that.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

This reply has been marked as private.

[flashteker@gmail.comMember]

Oh….

Yes you are right !

I’ll fix that bug in the next version.

Sorry.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Fred.

Sorry for your inconvenience.

I’ve found that problem and updated the firmware.
Please use this : https://github.com/showjean/ ps2avrU/releases/tag/V1.3.3

And…
Quick macro support Space also.
Could you tell me when it doesn’t work?

Thanks
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in my products.

Here I attached a pic of b.87R options that shows the equivalent to your choice for B.87.

Surely I’ll recheck your order.

thanks
Hojin.Yi

• This reply was modified 7 years, 4 months ago by  flashteker@gmail.com.

[flashteker@gmail.comMember]

Hi

Only 6 colors?

No. it can show all the real colors.(26x256x256 =16777216)

You can pick one from the palette in BootmapperClient program.

Thanks.
Hojin.Yi

 

[flashteker@gmail.comMember]

Yes it’s possible.

While you place an order, leave a message  saying that you want 6×4 layout.
(or send me an email after placing an order.)

Thanks.
Hojin.Yi

[Author]

Posts