[flashteker@gmail.comMember]

Hi

Thanks for your interests in my products.

1. Yes. switches will installed with(on) the plate.

2. You can ask me a full-keyboard except keycap.
If you want soldering switches, then you should ask me separately since there is no such option in the shop.
(It would take 50days when you include “soldering switches.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Oh… Really sorry.

I’ll check and resend new one.

What else do you need?
(I think we should take through email.)

My email address is “flashteker@gmail.com”.

[flashteker@gmail.comMember]

^_^

[flashteker@gmail.comMember]

Um…

The easiest way is to place a plate on your PCB.
Then you will see where to put switches as well as holes.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

It is depending on switch type.

But it doesn’t matter since my pcbs support both type.

And the stabilizer is a pcb mountend.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi.

Either way is possible.

But I recommend you to install them yourself.
Because
– It takes too long time (around 50 days including round trip)
– You have to pay delivery fee.

So it’s better for you to order only kit with other parts soldered,
and solder the switches for yourself.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

You can turn off RGB LED or in-switch LED by changing mode.

– ESC+Capslock : changing in-switch mode
– ESC+shift+Capslock : changing RGB LED mode

For more details, see http://blog.winkeyless.kr/185.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Yes. you can set the keymap for the right-shift key(s) by using BootMapperClient program.

You should download this program to your desktop.
(don’t have to install it.)

For more details, see http://blog.winkeyless.kr/183.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi
Thanks for your interests in our products.

Um…

Actually our keyboards don’t have a specific function to set the in-switch LED brightness.

USB has limitation of electricity flow.
In-switch LEDs are always using the maximum power available.

So If you make the RGB brighter, in-switch LED is getting darker.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

Yes it’s possible to make it 6×4 layout.
Just leave a message when checking out.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi
Okay I see.

You don’t have to spend any money but in-USA domestic delivery fee.
(I have a DHL bulk quota for international delivery.)

But last one more thing…
Could you take a pic of the problem with the keyboard?

And now we had better move to email to talk about your keyboard.
My email address is flashteker@gmail.com.

Thanks.
Hojin.Yi

P.S : It’s too late. Now I’m going to bed. Have a nice day^^

[flashteker@gmail.comMember]

HI Nathan.

Thanks for your interests in our products.

1. Sorry. I don’t offer R(North)-positioned in-switch LED for B.miniEX.

2. B.miniEX offer the options “capsLock postion” and other layouts. They are not in the PCB page, but in housing case.

3. I’m not sure when to start again offering aluminum plate yet. I wish next month, but it depends.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Thanks for your kindness.

I’m not sure whether it’s due to bad soldering or broken parts.

As you have seen in this FAQ board,
I’ve never met your problem.

If the led lights, I don’t think it’s due to bad soldering nor broken.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes, the model “WS2812B” would work.

If you want it, I can send you new one free.
But it will take a little longer since I will ship it by Postal parcel service.

If you find them around you, I’m willing to pay for them.

I think you don’t have to replace diodes which are affecting switches.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

1. Could you try to upload new firmware?(http://blog.winkeyless.kr/183)

2. Could you replace the RGB LEDs(9th and 10th)?
(If not, you may send your keyboard to me.)

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

some scratches when annodizing.

I know they are inevitable at the moment.

But I want to find a solution to prevent them.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Yes.

You can see all the parts you need to assemble a keyboard
http://winkeyless.kr/the-stuffs-to-make-keyboard/.

If you need more details, see http://winkeyless.kr/faq/

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

^^;

[flashteker@gmail.comMember]

Hi

Could you tell me your order number to inspect deeply?

Could you show me the RGB LED setting of bootmapper client.

Thanks.
Hojin.yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

I think it’s impossible to fix the LED brightness while toggling RGB LED on and off,
since USB cable has the limit of electricity which is shared by in-switch LED and RGB LED.

I hope you to understand that.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Thanks for your interests in our products.

Yes it’s possible.

But in the Winkeyless shop, there is no extra jobs like “soldering switches”(necessany) and “soldering in-switch LED”(not necessary) to complete a keyboard.

So after you place an order without extra job,
you should ask me to do the extra job by an email.

Then I’ll send you a separate invoice through Paypal.
(Soldering switches : $22, soldering in-switch LED : $17)

But YOU HAVE TO KEEP IN MIND THAT If including the extra jobs, it would take 50 days to complete jobs.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Please check around the soldering parts of bad switches and in-switch LED.
(This order didn’t contain any in-switch LED option.)

I’m sure you can find it.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

I think you should check soldering.
The problem you described is generally due to bad soldering.

I guess there would be some electricity short or loosely attached parts.

Could you tell me your order number?
(If you buy it from someone, ask him.)

And can you try upload new firmware, ps2avrGB_firmware_V1.1_160228.zip?
(http://blog.winkeyless.kr/attachment/cfile24.uf@2523E04656D1F1FC1D8A67.zip)

For more information, see http://blog.winkeyless.kr/183.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi Ron.

Sorry. I can’t provide you with it.

I hope you understand that.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Sorry, no !

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Temporaily I stopped offering aluminum due to quality problem.

I guess next month I can find solution.

So next month it would come back.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Hi

Sorry for your inconvenience.

Try these solutions.

1. Connecting it in wrong connection mode.
-> While holding down “U”, connect your keyboard.
(If you want to connect it in the mode “PS/2”, hold down “p”.)

2. Remove device drive(HID drive) from OS device manager and replug the keyboard.

If they don’t help, please let me know by email.
My email address flashteker@gmail.com.

Thanks.
Hojin.Yi

[flashteker@gmail.comMember]

Usually green 1.8mm LED uses 910 Ohm resistors.
But ff your PCB is 60% style like B.face, the 820-ohm resistor can support all colors.

830ohm?
I think it will work.

[flashteker@gmail.comMember]

Um…

I think I was wrong.

It is transparent or matte transparent.

Thanks.

[flashteker@gmail.comMember]

YES !

Winkeyless + No using 1x winkey.

Thanks.
Hojin.Yi

[Author]

Posts