[flashteker@gmail.comKeymaster]

Hi

Thanks for your interests in my products.

Sorry, I don’t have a PCB with that layout.
Nor take an order of custom PCB.

I hope you to understand that.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Yes.

All holes have the same size, so they all are going well with holtites.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Sorry for your inconvenience.

I’ve just fixed the stock of holtites so you can add them.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

There is no difference except “look”.
I think either is OK.

And… sorry. There is no return policy.
It is not a ready-made order but custom.
Only If it has any defect, I’ll send you a new one or refund it.
(So compatibility is not a case for refund or return.)

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

The difference is only in-switch led position.
(Please see : https://winkeyless.kr/difference-between-r-and-non-r-pcb/)

And for the measurement for a PCB, please visit here : http://blog.winkeyless.kr/191

Thanks.
Hojin.Yi

 

 

[flashteker@gmail.comKeymaster]

Hi

Do you have any reason to choose “B.87 R” , not “B.87”?

Non-R version(B.87) offers SMT options which is including
– Presoldered Controller parts
– Presoldered RGB LED parts
– Presoldered diodes and resistors.

I strongly recommend you to choose that unless you are not  very high-skilled in soldering.
(Controller parts and RGB LED chips are very tiny.)

If you really want to solder all of them by yourself,
you should add only parts
– PCB with controller parts + RGB LED parts + diodes + stabilizers
(If you want in-switch LED, additionally you should put in-switch LED and resistors into cart.)

– a set of housing case

I don’t offer keycaps or USB cable.
(See for more details : https://winkeyless.kr/the-stuffs-to-make-keyboard/)

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

They are Cherry MX ones.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Thanks for your interests in my products.
Yes it’s possible to order fully assembled one.

1. In a PCB item
– Select “SMT” option
– Choose “switches” and “soldering switches”.
(If you want in-switch LEDs, choose “in-switch LED” and “soldering in-switch LED” too. )

2. When you add a housing case, please select the layout you want.
If you don’t know which layout you want, just show me a keyboard photo.
Then I’ll take care of it.

The left thing you have to do is putting keycaps and USB cable which I don’t offer.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

I think you have a wrong number.

Here is for Winkeyless not QMK.
Even if you are using ps2averGB firmware, please contact a QMK provider.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Could you give me a time?

I have to look into deeply.

Anyway. it is working well with version 1.3 so I hope you to use that.
(There is no such big difference.)

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi Sorry for your inconvenience.

Could you modify “Debounce value” by using BootmapperClient?
You can find that in Option tab.

Thanks.
Hojin.Yi

Attachments:

You must be logged in to view attached files.

[flashteker@gmail.comKeymaster]

^_^

Whenever any update, I’ll let you know.

Thanks
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Thanks for your suggestion.

I would like to. But I can’t tell when it’s possible.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Sorry, I don’t think so.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

This reply has been marked as private.

[flashteker@gmail.comKeymaster]

This reply has been marked as private.

[flashteker@gmail.comKeymaster]

This reply has been marked as private.

[flashteker@gmail.comKeymaster]

Hi Matthew

Sorry for your inconvenience.

1. For the pc compatibility, please remove ps2avrGB driver from your PC and replug your keyboard again. (http://winkeyless.kr/how-to-fix-when-keyboard-doesnt-work-after-uploading-firmware/)

2. I think the reason that some keys are malfunctioning is bad soldering such as electric shorts.
Please clean your PCB around your soldered parts.

Could you let me know your order number to look into it more precisely?

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Thank you very much.

I’ll look into it asap ^^

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Oh…

Thanks for your information.

Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Thanks for your interests in my products.

Um…

Actually I’m not sure my PCB will work on that firmware.
To be clear you’d better contact QMK.
But we also provide our own firmware and UI Program.(http://winkeyless.kr/firmware-installing-and-setting/)

For a future use, I hope you to use our own ones.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

This reply has been marked as private.

[flashteker@gmail.comKeymaster]

Hi

Sorry for late reply.

The differences are

1. Top plate : Bold is using aluminum one while BBB is acrylic.

2. Feet : Bold is using two rounded alu ones while BBB is acrylic linear ones.

3. Layers : Layers of Bold are composed of a Plate + a Diffuser + Feet
while 3 acrylic layers + a diffuser + feet for BBB.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

It is mini-USB.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Here : http://winkeyless.kr/product/bold-case-mini-ex/

^^

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Oh… No.

At the moment I offer only “Bold” case.(http://winkeyless.kr/product/bold-case-87/)
whose plate is aluminum.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi

Sorry for your inconvenience.

If it isn’t recognized, please remove the driver and replug it.

If you can’t upload a new firmware(ps2avrGB_NKRO.hex),
please enter bootloader mode by using BootmapperClient.

For a new layout you need to upload keymap file(staring with “keymap_”, not firmware.

I hope it will help.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Hi Sorry for late reply.

Only RGB LED is not working properly?

It means bad soldering or broken RGB LED.

I have nothing to tell you but check your soldering or RGB LEDs.

Thanks.
Hojin.Yi

[flashteker@gmail.comKeymaster]

Yes.

The price for in-switch LEDs is same as for switches.

But, As I mentioned,
you could do that by yourself,
And failure rate is quit low.
(Visit holtite page to see how to install them : http://winkeyless.kr/product/holtite/)

Thanks.
Hojin.Yi

 

[flashteker@gmail.comKeymaster]

Hi

Yes. if you select “SMT” option when you add a PCB item.

And if you want me to install holtites, please let me know after placing an order.
Then I’ll send you an invoice for the installing holtite for switches($27).
But I’d like to recommend you to install them of yourself since it’s quite easy.

Thanks.
Hojin.Yi

[Author]

Posts